Project examples: what typical TV mounting jobs look like and what they cost
TV Mounting Line Fullerton shows worked examples of typical Fullerton area projects — the room and the TV it is planned for, the hardware involved and the market price range such a job carries. Every picture is an AI concept illustration; no installation was performed or arranged through this site.
Bookings aren't open yet. Leave your name and number; your message is recorded, and you'll get one message when a local installer is available.
Worked example pages. The pictures are AI concept illustrations, not photographs; no installation was performed or arranged through this site; prices are typical Fullerton area market ranges, not quotes.
Illustration
Worked case: a 55-inch TV on 1920s plaster in a hillside bungalow beside a built-in bookcase — how it is done and what it runs
Worked example for a 1920s hillside bungalow: a 55-inch set on a fixed mount, a probe hole to find studs behind plaster and lath, tape over the finish, and a paintable cord channel that leaves the old wall and the built-ins alone. Method, tools and typical price ranges.
Typical total: $145–$215 (market range, not a quote) · Related service: Craftsman and Spanish Revival Home TV Mounting
Illustration
A 55-inch TV and soundbar on an interior partition in a west-side townhome — the plan, the steps and the price range
Worked example for a townhome in a master-planned community: a 55-inch TV on a tilting mount fixed to an interior partition, the wall shared with the neighbor left alone, a soundbar on its own bracket and the association's rules checked first. Steps, hardware and typical Fullerton price ranges.
Typical total: $170–$250 (market range, not a quote) · Related service: Condo & Townhome TV Mounting
Illustration
A 43-inch TV on a bedroom wall in a rented apartment near campus — asking the landlord, counting holes, the price range
Worked example for a rental near Cal State Fullerton: a 43-inch TV on a fixed mount in two studs, the landlord's written answer first, the holes counted for move-out and a surface raceway instead of an opened wall. Steps, hardware and typical price ranges.
Typical total: $100–$140 (market range, not a quote) · Related service: Apartment & Student Rental TV Mounting
Illustration
Worked case: a 55-inch TV on an exposed brick wall in a downtown loft — masonry anchors, the building's rules and the price range
Worked example for a downtown loft with an exposed brick wall: a 55-inch TV on a tilting mount with masonry anchors set into the brick, a conduit scan first, the building manager's answer and a painted surface run for the cables. Steps, hardware and typical price ranges.
Typical total: $210–$385 (market range, not a quote) · Related service: Downtown Loft & Brick Wall TV Mounting
Illustration
A large TV on a pull-down mount over a stacked-stone fireplace in a hillside family room — heat, height and the price range
Worked example for a hillside family room with a tall stacked-stone chimney wall: a 75-inch TV on a supplied pull-down mount above a gas fireplace, the wall's heat checked after a long fire, anchors in solid stone and a surface cable run. Steps, hardware and typical price ranges.
Typical total: $315–$565 (market range, not a quote) · Related service: TV Above a Fireplace
Illustration
Worked case: a 55-inch outdoor TV on a stucco patio wall under the roof — sun, hardware and the price range
Worked example for a covered patio in a ranch-house neighborhood: a 55-inch outdoor-rated TV on a supplied mount, stainless hardware into the framing behind the stucco, a sealed entry, a GFCI outlet and a position chosen to avoid the afternoon sun. Steps, hardware and typical price ranges.
Typical total: $215–$390 (market range, not a quote) · Related service: Outdoor Patio TV Mounting
About these examples
Each example is a hypothetical, typical project for a kind of home that is common in the Fullerton area. Every picture is a concept illustration, AI-generated — not a photo of a completed installation — showing the kind of room and wall the scenario describes. The prices are the same market ranges used by the availability check, shown as ranges because an installer prices the actual job after seeing the wall.
What the ranges include
Each table starts from the labor range for the TV size on a standard wall, then adds the wall type and the options that define the scenario — a plaster or stone wall, a fireplace, hidden wiring, a supplied mount. Add-ons listed under an example are priced the same way. Nothing in these pages is an offer; the ranges describe what such work typically costs locally.
How to use them
Find the example closest to your room and wall, note the hardware it calls for and the typical range, then run the availability check below with your own TV size, wall and ZIP — the range it shows is built from the same table.
Availability & price range
Check availability and get your price range
Bookings aren't open yet — answer a few quick questions about the TV and the wall and get a typical Fullerton price range right here. Typical Fullerton prices for one TV, labor only unless an option says otherwise. This is a market estimate, not a quote.